Heart Flower Collage

14 days of hearts - no. 6

I had some background papers leftover from this project so I decided to make something similar, but on a heart base.  I used a 100mm canvas board heart that I had lying around, but you could use any other type of heart substrate or glue several die cut hearts together to make a strong base.

PROCESS

• Cover the heart in glue and then add strips of old book pages or newsprint background paper making sure to glue down any overlapping edges.
• When dry paint lightly over the surface with white acrylic paint using a dry brush.  The aim is to soften the appearance of the text, but not to completely obscure it.
• Using a dry brush again, paint around the edge of the heart with black paint.
• Cut about 16 pointed ovals (petals), each about 1-inch long, from coloured patterned paper.
• Use a hole punch or cut a small circle from scrap card.
• Glue the (petals) around the circle to create a flower shape.  
• Cut several smaller petals from the same coloured patterned paper and glue those around the centre of the flower. 
• Add additional petals in the gaps between petals (optional) to fill out the flower.
• For the stamens cut thin strips about 1/2 inch long from yellow patterned paper.
• Glue them around the centre of the flower (tweezers would be very useful here!).
• Use a hole punch or cut a small circle from the yellow patterned paper and glue that to the very centre of the flower.
• Glue the completed flower to the canvas base.
• Cut 3 leaf shapes about 1 1/2 inches long from green patterned paper and slot them in behind the flower.

SUPPLIES:

• Heart base
• Old book pages or newsprint patterned paper.  I used the Old Newspaper Textures digital paper set.
• White and black acrylic paint
• Coloured patterned paper. I used: 
• Scattered Gold Shimmers in Green
• Pattys Desert Strips 3 Bundle (sample freebie) [blue-purple paper]
• Glitter Digital Papers [including yellow paper]

Rolled Paper Flower Heart

For the second heart in the 14 Hearts series, I decided to keep it simple with just a few rolled paper flowers and some foliage.  I really like the combination of bright colours with Kraft, so that was the colour scheme I chose.

• Cut 2 scalloped hearts (145mm) from Kraft card and one from pink card.
• Glue together.
• Cut 2 hearts (125mm) from Kraft card and glue together.
• Glue the smaller heart to the scalloped heart.
• Cut 3 rolled paper flowers with the heart-shaped petals from pink paper.  (I used 135gsm. The large flower was set to130mm width and the smaller flowers were set to 100mm width.)
• Cut 2 rolled paper flowers from purple paper (I set the size to 100mm width).
• Cut various types of foliage from green card. Use different shades for added interest.
• Make the flowers 
• start from the outside and roll towards the centre
• Keeping a loose hold of the top and bottom of the rolled flower allow it to unfurl a little.
• Add glue to the end of the flower and hold it firmly against the bottom of the flower (use hot flue for quicker adhesion).
• Glue the foliage down.
• Glue the flowers down starting with the large pink flower at the centre and arranging the smaller flowers around it.

Process video (short):

Supplies

Rolled Paper Flowers

Foliage 

Heart/Scalloped heart cut files - pre-installed on Brother ScanNCut

Kraft Card

Coloured Card

Glitter Background Floral Greetings Cards

Affiliate links used. If you follow a link and then make a purchase I will receive a commission at no additional cost to you. 

All of the products mentioned in this post are products that I have bought and paid for myself.

Hello!  Today I'm sharing a few cards that I have made by creating simple backgrounds with Aladine's Izink Gold Diamond Paint and some graphics from the Vanilla Blossom Watercolor Set from The Hungry Jpeg. 

In case you've never heard of it, Izink Diamond Paint is a glitter paste and paint in one.  Although you can apply it with a paintbrush it wouldn't really work for painting fine details.  It would work really well with stencils though.  I love that it is super sparkly and that the paint is not too wet like a lot of other glitter paints/glues.  I've purposely left the stripes and spots a little bit rough but it's up to you how neat and tidy they are.

The Vanilla Blossom Watercolor set has a number of elements including florals, foliage, butterflies and birds.  One of the florals had three complementary images that would work as decoupage.  

I filled an A4 sheet with the various images that I wanted to use and printed that out.  If you're going to try to decoupage remember to group all of the relevant images and resize them together.

I'm using sentiment strips that I created myself.  Check out this blog post to see how I made them.

Card 1

- Paint horizontal stripes across the card front and allow to dry.

- Cut out the three different floral images (flower with stem, flower with no stem and flower on its own).

- Layer the floral images using foam pads to create a 3D decoupage effect.

- Glue the decoupaged flower to the front of the card and add a sentiment.

Card 2

- Paint horizontal stripes across the card front and allow to dry.

- Cut out one each of the flower with stem, and the flower on its own and stick them together with foam pads.

- Rotate the card to landscape orientation so that the fold is at the top.

- Glue the floral to the left-hand side of the card front and add a sentiment.

Card 3

- Use a saucer, bowl or similar to paint curved stripes across the card front and allow to dry.

- Cut one each of the flower with stem, flower and leaves with no stem, flower on its own and a butterfly.

- Layer the flowers with foam pads and glue it in the bottom right corner of the card front.

- Glue the butterfly in the top left corner (ish) and add a sentiment.

Card 4

- Paint rough circles about 1.5cm / ⅝ inch onto the card front and leave to dry.

- Cut out two of the flower with leaves, one flower on its own and a butterfly.

- Decoupage one of the flowers with leaves and the flower on its own with foam pads.

- Arrange the flowers toward the centre of the card and glue them down.

- Add a butterfly (I chose the top left corner) and add a sentiment.

Use a black card blank for an alternative look.

I really like the gold, but the diamond paint comes in a few different colours so it could be fun to try out different card and paint combinations as well as different florals, or even multicoloured glitter paint backgrounds.

Watch the process video:

SUPPLIES

Black and white card blanks 

Aladine Izink Diamond Paint Gold (UK)

Aladine Izink Diamond Paint Gold (US)

Vanilla Blossom Watercolor Set

Floral Collage Canvas

So, you've accumulated a load of patterned papers (either physical or digital), but you have no idea what to do with them.  At least, that's a problem that I have. I'm not a prolific card maker, nor do I scrapbook, but I can't resist a pretty patterned paper or an interesting background texture.  So what to do?  Collage, that's what!

I tend to overthink things and spent ages trying to decide what to collage.  In my mind I felt like it needed to be some grand, artistic piece.  But it really didn't have to be so complicated.   In the end I went with a simple floral layout inspired by an embroidery design.

I used papers from my digital stash, but any papers would work.  This would actually be a great project for using up paper scraps.  I chose a newsprint, a pink paper with a a slight texture for the flowers, two different green papers for the stems and leaves, yellow paper for the flower centres and a lovely bluey-purple paper for some berries.  I've listed links to all the papers used at the end of the post.

Step-by-step

1.  I printed out three sheets using one of the designs in the Old Newspaper Textures set.  The original file is a 12 x 12 sheet and the text was quite large.  So I resized it a couple of times to make the print smaller.  I tore pieces from all three sheets and stuck them down on the canvas board trying to get a nice mix between the different text sizes.

2.  Using the pink sheet I cut a strip about one inch wide and then cut about 30 petals shapes.

3.  I arranged the petals on to the canvas board to create 3 flower heads.

4.  I cut thin stems from one of the green papers and various sized leaves from the other green paper, then arranged them onto the board.

5.  I cut a few small circles for berries from the blue-purple paper and three yellow circles for the flower centres and added them to the piece as well.

At this point the collage was finished, but I felt like it didn't stand out from the background enough. So I went around the edges of the petals, leaves and berries with my Derwent Inktense pencils to help lift the composition off the page.  I think that I might have overworked it a bit, but it does seem to have done the job and I still like the end result.  (Original on the left, "enhanced" on the right.)

  

Tutorial

Watch the process video on my YouTube channel.

SUPPLIES

5 x 7" Canvas Boards  (you could also use scrap cardboard)

Matte Medium (Mod Podge Matte [Europe], Tim Holtz Distress Collage Medium [Europe], Tim Holtz Distress Collage Medium [US])

Derwent Inktense Pencils

A2 Self-Healing Cutting Mat

Backgrounds and digital papers:

Old Newspaper Textures

Scattered Gold Shimmers in Green

Glop Wallpaper 08 (sample freebie available with fewer backgrounds) [apple green paper]

Glop Wallpaper 16 (sample freebie available with fewer backgrounds) [pink paper]

Pattys Desert Strips 3 Bundle (sample freebie available with fewer backgrounds) [blue-purple paper]

Glitter Digital Papers

Quick and Easy Floral Greetings Cards

I may have mentioned before that I absolutely love buying craft supplies!  It's bordering on an addiction.  The problem with that is that it is costly and the supplies take up a lot of space (that I don't have).  So I've been trying my hardest not to succumb to all the juicy deals that seem to keep popping up in my inbox lately 😩.  To help keep my cravings at bay, I've been scouring the "Freebies" section at Creative Fabrica.  It's the perfect foil to my buying habit - the products don't cost anything, they only take up space on my hard drive and I get to feel the same joy and satisfaction that I get from buying and receiving physical items 🙌.

Anyway, on to the project!  These floral greetings cards are really pretty and quick and easy to make.

 Aside from your computer and printer, you will need:

• Underwood Champion Font 
• Rosaleen Watercolor Flower Clipart
• Card
• Scissors
• Glue / foam tape or pads

Step 1:

Download the clipart and import the images into a graphics program, e.g. Photoshop.  Adjust the size so that they are about 10 x 13cm (to fit an A6 card) or whatever dimensions you need for the card that you want to make.

Step 2:

Position the graphics so that they are one side of the page (rotate if required and use guides to help you position them), then print out.

Step 3:

Cut the A4 sheet in half, then score and fold to create two greetings cards and put them aside.

Step 4:

Create another page in your graphics program using the graphics from step 2, but this time fill the page, then print.

Step 5:

Cut out one central flower from each design on the printed sheet.

Step 6:

Use foam pads or dimensional glue to stick the cut flower onto the greetings card base to add dimension.

Step 7:

Download the font and install on your computer.

Step 8: 

In your graphics program create a new project with an A5 sheet.  Draw a rectangle to cover the sheet and fill it in black.

Step 9:

Using the text tool, select the Underwood Champion font and create a page full of short sentiments to cover a variety of occasions and lay them out onto the black background.  Select white for the font fill colour.  When you are happy with your sentiment sheet print it out.

Step 10:

Cut out one of the sentiment strips and attach it to the front of the greetings card.  

Your card is complete!  I chose to do some decoupage on the front because I think it adds something extra, but that is optional (steps 4-6). 

The sentiment sheet does take a little time to put together, but once you have done it choosing a sentiment is very quick.

You could easily make a stack of these to have on hand for any occasion or to sell or gift as a set.  

Head over to Creative Fabrica to grab these assets and make your own cards, or check out the vast selection of fonts and graphics (both free and paid for) and be inspired to bring your own creations to life.

 

Friends Are The Flowers in The Garden of Life - With Free Download

I made this for a friend a while ago.  It's been a while since I've seen it, but the adhesive failed so she asked me to fix it and now that I've seen it again I really love it!

The base is an MDF shape that I picked up at a craft show.  I covered it with a couple of coats of silver acrylic paint.

The flowers were made using Tattered Lace's Floral Layers Rose die, which makes really lovely layered flowers, but sadly has been discontinued.  However any floral dies would work.  Same for the foliage.

I designed the sentiment in Canvas Workspace, positioning all the letters so that there was some overlap, then welding them together so that the sentiment was a single piece.  I cut 4 layers from 300gsm card and glued them together to get a solid, dimensional appearance.  Download the SVG cut file for the sentiment here (personal use only please).

To arrange the flowers I used hot glue to affix a piece of acetate to the back of the watering can that extended from the top to the handle and then used hot glue to stick down the flowers. Then I cut cut some foliage, doubling up the layers again to give them some rigidity, and just slotted them in around the flowers.

Fonts:

King Basil
Lily Bloom Regular
The Bravery

Beachwood Sans

Magnolia Fridge Magnet

Remember all of those decoupage flowers taht I made a few weeks back (mentioned in this post)?  I'm still not sure what to do with them all and then I had the idea of making fridge magnets.  

I decided to use one of teh die sets rather than the cut files becouase it was much quicker for me.  I gave the assembled flower a couple of coats of spray varnish to seal the paper and make it more resistant to moisture and staining but the gloss finish ended up giving it a glazed ceramic look, which is really pretty.  Then I simply cut out the base layer from a mganetic sheet and then glued the two layers together.  

It's a really simple idea, but very effective and it opens up a whole new way of using my die cuts.

Quick and Easy Hanging Heart

If you've read my last couple of posts you'll know that I now have a LOT of die cut flowers in my stash.  I don't really have any plans for them, but it would be a shame to leave them bagged up and in a box somewhere.  So I made up a quick and easy hanging heart to display a few of them.

• I cut out the heart from old cereal boxes (I used a Sizzix Framelits heart die).  [Incidentally, 4 or 5 layers of cereal box weight card glued together makes a good, rigid base comparable to chipboard or lightweight MDF.]  
• I painted the background using cerulean blue and titanium white acrylic paint (I used a stencil brush for the clouds).
• I chose a selection of flowers and arranged them at the bottom of the heart. (I used a selection from my many Tattered Lace 3D decoupage flowers - Bell Flower, Hydrangea, Blossom and Bloemen Primula).
• I added a butterfly in the top left corner (downloaded from thehungryjpeg.com).
• To finish I attached some twine to the back with hot glue as a hanger.

Simple, but very sweet.

More Decoupage Flowers

So, I might be a little obsessed.  After my first marathon flower making session I was inspired to dig out some of my old die sets to create even more.  I was shocked to discover that some of said die sets had not been used since they were bought in 2018! I'm not even sure that they're still available to buy.  I did buy the Tattered Lace Floral Decoupage Delights Vol. 1 and Vol. 2 USBs though, because as I said I might be a little obsessed!  Vol. 1 sold out in record time, but at the date of writing this Vol. 2 is still available from Create and Craft TV.

The flowers shown here are a mixture of old dies and a handful from Floral Decoupage Delights Vol. 1.  I haven't even made it to Vol. 2 yet, so I see a lot more flowers in my future 🔮.

EDIT 13/02/2022

The Floral Decoupage Delights USBs are no longer available, but individual SVG cut files and corresponding Charisma artwork can be downloaded from the Create and Craft website.

Tattered Lace Decoupage Flowers - Favourite Florist Collection

*This post contains affiliate links.  Read the Disclaimer for more information. 

 I am weak for any Tattered Lace 3D decoupage floral dies.  I love them, but unfortunately my wallet doesn't always allow me to indulge myself.  But a few weeks ago there was a 50% off sale at Create and Craft so I took the opportunity to bag a few from the Favourite Florist collection 🙌.  

The collection consists of 6 "In the Garden" flowers, which as the name suggests are flowers that you would find in your garden, and 6 "In the Field" wildflowers, and they come with free downloadable coloured images (a.k.a. Charisma).  I purchased the Peony, Hyacinth, Lily and Pelargonium dies from the "In the Garden" collection and the Lavatera and Wild Rose from the "In the Field" collection.  

I spent a good while playing around with the colours in a graphics program (because the Charisma images only came in one colour) and then printing, cutting and putting them together.  My favourites are the Hyacinth and Lavatera dies.  Lily and Peony are also very pretty with lots of decoupage elements.  The wild rose is very pretty as well, but it would have been nice to have a few more decoupage elements.  The Pelargonium is OK but I have another geranium/pelargonium die set from a different collection that I much prefer.  

You can use foam tape to put these together, but I used Pinflair glue gel.  It's crystal clear and odourless and gives great dimension.  Now I just have to figure out what to do with all these flowers...

Tattered Lace Sensational Flower and 3D Flower Pot Dies

*This post contains affiliate links.  If you click on the link and subsequently make a purchase you will not be charged extra, but I will receive a commission.

A few weeks ago I managed to snag a great deal from Create and Craft.  The offer was to get the Sensational Flower and Flower Pot die sets at effectively half price (BOGOF).  It looked so cute and I like the 3D element and I like miniature stuff so.....

The flowers and pot come with Charisma (which for the uninitiated is a pre-coloured image that fits the die perfectly that can be downloaded from the Create and Craft website).  The flowers come in yellow and purple, with a couple of additional stems and flower heads so that you can decoupage or fill out the bouquet.  If you have access to a graphics program the colour could be changed to anything you like!  So you could have sunflowers, gerberas, daisies or other similar flowers. I actually recoloured both colour options using alcohol markers because they came out a little more pastel on my printer and I wanted a bold colour. 

The pot comes in terracotta only but again could be recoloured and the die set comes with some additional lacy details that could change the look completely.  I'm going to see if I can get a glazed ceramic look by using Glossy Accents.  You could even stick two halves together to get a free-standing pot and flower display.

The BOGOF deal is no longer available but at the time of publishing you can still get the Sensational Flower die set and the Flower Pot die set for £14.99 each from createandcraft.com.

Purple Flower Embroidery

I so enjoyed doing embroidery again that I went out and bought some 4" and 6" hoops.  I liked the way it looked on denim and as I still have a massive pile of denim scraps I've used that as my base fabric.

I love the flower! I used buttonhole wheel stitch for it, with black French knots at the centre.  I'm still working out how best to do leaves so there are quite a few different versions here.  But from where I started (bottom right leaf) I can definitely see a lot of improvement by the time I got to the last leaf.  I also like my attempts at a palm-like frond and a pine leaves.  I used an open leaf stitch for both.  The leaf clusters are simply lazy daisy stitches on a stem. 

These little projects are so much fun.  I see more embroidery in my future!  The 4" hoops are very portable and stitch up quickly enough to satisfy my impatient nature.  I'd like to try some different subjects like birds and butterflies as well as more florals of course.  I might even try my hand at designing a little project.

Back to My Roots

The very first needlecraft I tried was knitting.  My mum taught me how to cast on and knit a scarf when I was about 6 or 7.  When I went off to school at 8 I learnt sewing and embroidery and I really loved both.  However they both fell by the wayside.  Then around 2013 I took embroidery back up and practised on and off for about three years.  When I started I only knew how to chain stitch, but thanks to sites like Mary Corbet's Needle N Thread and PinTangle I learnt a whole range of different stitches.  But then I discovered papercrafting and my needlecrafts were all but forgotten. Until now!

I've been seeing a lot of really amazing embroidery via Instagram and Tumblr for a while now and thinking how great it would be to be able to create such loveliness.  On a completely different note I was cutting up some old jeans to turn into some sort of patchwork thing and noticed that a) the denim was quite soft and would be relatively easy to embroider, and b) the scrap I had was the perfect size for a 4" hoop.  And, being the craft stash junkie that I am, obviously I have a hoard of embroidery threads and needles just sitting there waiting to be used.  So with the stars thus aligned I started my first piece of embroidery for several years, and it was a real joy.  It took me quite a while for such a small piece, probably a whole day altogether. (Is that long for something like this?  I have no idea.)  Anyway I had fun and I hope it's not such a long time time before I feel moved to stitch again.

Floral Friends Box Frames

I bought a few of the girls from the Tattered Lace Floral Friends die collection - Lily, Jasmine and Poppy.  I've been calling them flower fairies, but I think that they are actually just girls wearing floral costumes.  I do like the idea of them being fairies though so maybe I'll just stick with that.

The dies are 3D decoupage dies, which means that they have multiple layers that can be stacked together to give the finished die cut added dimension.  I bought them with the intention of using them in box frames to make cute wall art and I finally got around to putting a few together.

          

It was difficult to capture in the photos, but I've added some glitter accents to some of the dresses and flowers. These would look really sweet in a kid's bedroom.  I'm going to make a couple to my nieces-in-law for Christmas.  They are dancers and  I think they would love these.  All four are now available in my Folksy shop.

Crafting on the Go

We went camping a few weeks ago and I wanted to take something crafty with me; something portable that wouldn't take up too much space.  I found some old card that I had embossed using some Darice embossing folders, which were perfect for colouring in.  Along with my watercolour palette and a water brush I had enough to keep me entertained in a nice, compact package.  This roses image is so pretty and I love the end result.  It would look beautiful on the front of a card, or simply displayed in a frame as a piece of art.

DIY Decoupage

If you read this blog then you'll have noticed that I'm partial to downloading graphics and fonts.   Well, with all the weekly freebies available and the occasional purchase I've amassed a LOAD of digital images and graphics.  Rather than leave them to gather cyberdust I decided to try my hand at creating my own decoupage. 

Working from the base image of a floral corner I removed parts of the image in stages; the base layer had the flower arrangement with leaves, for the second layer I deleted the leaves, for the third layer I deleted more of the flowers and for the final layer only a single flower remained.  I looked at where the elements overlapped as a guide to creating the layers.  My Brother Scan N Cut made quick work of cutting out the layers.

It makes a really pretty card with the arrangements placed in opposite corners and finished off with a simple, stamped sentiment.  Preparing the images did take a little time, but now that it's done I can achieve the same result again easily as well as being able to resize the elements to suit different projects.  This is something I'd definitely try again with other images of floral arrangements.

Quick and Easy Hanging Heart

This post contains affiliate links.

My friend came to me a few days ago to ask for my help to make a last minute teacher gift.  She requested a hanging heart that said "Athrawes gorau" (Best Teacher in Welsh) and personalised with the teacher's name and her son's name and featuring the colour purple.  

To make the heart I cut five hearts from white 300gsm cardstock, and one from Kraft card.  I punched holes in each of the curves at the top of the heart then stuck all the layers together using PVA glue 

with the Kraft heart at the back.  (I used my ScanNCut to cut the hearts but a die would also work.  If you don't have a die cutter or cutting machine I recommend using a square or a rectangle.)  To prevent the stack from warping I put it under a heavy stack of books as it dried.  When dry it feels very sturdy - like chipboard.

Meanwhile I found some pretty digital background paper and in a graphics program I used the heart template as a guide to place the text before cutting it out with the ScanNCut and sticking it to the top of the heart stack.  Incidentally the fonts that I used for the teacher's name and the sentiment are Old Emma Decorative and King Basil (which I love).

To finish I printed out some flower and leaf graphics, cut them out and added them to the heart.  It's not very clear from the photograph, but I printed three of each flower, cut each one gradually smaller than the last and then layered them up to add some dimension and make them more interesting.  I threaded some thick string through the holes to create the hanger.

Download free floral graphics here and here.

L'amour est la cle

When it comes to craft supplies I'm a hoarder.  I can't bear to part with the smallest scraps of paper or a bit of ribbon that came with a gift or some old cardboard that could be used for some project or other.  So in an attempt to destash I decided to make a heart wall hanging out of old cereal boxes that I've been putting aside for a while.  

I made a large heart template on a piece of A5 card and then traced around that on the large panels of the cereal box.   After cutting them out (4 of them) and punching holes so that the finished piece could be hung, I stuck the 4 hearts together to get a thick, chipboard type of effect.  I also used the heart template to cut a heart from a piece of woodgrain effect paper.  NOTE - I suggest placing the heart stack underneath something heavy to prevent it from warping as the glue dries.

I cut the flowers with my ScanNCut using a pattern that I designed myself and coloured them using Spectrum Noir alcohol markers, before layering them together.  The leaves came from another die set.  I also used some Katy Sue Flower Soft for the flower centres. 

I gave the padlock die cut the same treatment as the hanging heart in that I layered up several die cuts - 5 from plain white card and one from gold mirror card - to get some dimension.  I then went over the front and sides with copper gilding wax to take away the white edges. 

The lettering was die cut using Sizzix Brush Alphabet dies and then I added a few freehand hearts to finish it all off.  I decided to go with French as it was a present for my (French) friend's mother.  To finish it off I used some thick string, which gave it a bit of a rustic feel.

In case you're interested in any of the supplies that I used:

• Sizzix Brush Alphabet dies: upper case / lower case
• Tattered Lace Lock & Key dies
• Layered Flower SVG file - download for free
• Wood background papers*
• Coloured wood grain digital papers*

*affiliate link

Society Sunday - Cherry Blossom

This post contains affiliate links.  If you click on a link and subsequently make a purchase I will receive a commission.

I noticed some reports on the news about the arrival of cherry blossoms in Japan and its associated celebrations, which is what has inspired this edition of "Society Sunday".

My first pick is "Sakura & Fat Birds", featuring my favourite colour palette.  The artwork is clean and simple and the colours are fresh and vibrant .  Plus I love those plump birds!

"Sakura & Fat Birds" art print

Next up, a traditional Japanese-style illustration - "Cherry Blossoms - Pink".  Simple and understated, but very pretty.

"Cherry Blossoms - Pink" rectangular throw pillow

Do you change your home decor with the seasons?  I like the idea of that, but I'm a bit too lazy to actually do anything about it.  But if I ever got my act together I'd consider these window curtains featuring "Sakura Love - Grunge White".  They would be perfect for a Spring/Summer revamp.  The flowers are actually images of embroidered blossoms and branches which results in an interesting visual effect..

"Sakura Love - Grunge White" window curtains

Pretty, delicate, soft; that's how I'd describe "Cherry Blossom #3".  There's something so calming about this image.

"Cherry Blossom #3" art print

Cherry blossoms are generally pink, but in "Sakura Blue" the artist has rendered them in blue hues.  The colour palette and the ambiguous nature of the placement of the blooms, where one ends and the next begins, gives an overall effect of viewing the blossoms through water.  

"Sakura Blue" art print

From today (25th March) until the end of play tomorrow (26th March) PST you can get 40% off throw pillows, 30% off tapestries and + art prints and 25% off everything else with the code HELLOSPRING, so it's the perfect time to head over to Society6 and get everything that you need for a Spring revamp.